My take on a multi fit spool weight.

I Designed this after looking at several similar options and not finding any that fit the variety of spools ive got right off the bed.

Fits spools of various different manufactures inc but not limited to BambuLabs, Sunlu, Jayo, E-SUN, Kingroon, Tinmorry, Reprapper.

• for spools 50-72mm thick
• for spools with a core hole inner diameter of 50-85mm

The adapter itself weighs approx. 75g, i have found that filling it with a mixture of 2p and 1p coins (Approx 70pence worth) gives a total weight of around 350g. Please feel free to experiment with alternative options.

This Spool weight is a simple no supports 3 part print, with two versions included:

0.2mm standard - This version is as it comes with no fine tuning, if your filament is tuned and you have no issues printing threads at 0.2mm layer heights pick this one.

0.08 thread optimised - This Plate has layer height modifications to reduce the threaded areas down to 0.08mm layer height, which gives great threaded parts without any other tuning and the sacrifice of a little bit longer print time, if you haven't done much threaded part printing and aren't sure how well your printer prints threads, pick this one.