Futuristic and enigmatic cube lamp.

Warning

This lamp is quite challenging to print, especially the shell. When you print the shell prepare the bed of your printer very well. 

Adhesion of the bed is very important, because the lamp consist of separated tall sections. 

Beside it you have to open door of the printer for best cooling. 

If you have problem with print then try reinforced version with support. It prints longer but the result is more reliable.

I tested version with support using dual colored filament and it look like below 

(however I had small problem with stringing with this filament)

Instruction

I created two version of this lamp. Large and 50% smaller one.

The Lamp consist of three main parts.

Shell, shade and base

You can use any color you want. Best are dark colors for shell and base and bright for shade. In my case for shade I used PLA silk gold and blue.

Printing:

I tested it with PLA , 0,4 mm nozzle, 0,28 mm layer height (Draft)

Light source

I prepare this lamp to be used with two versions of light source

1. With LED Lamp Kit-MH001

It's look like this in lamp

2. With MR 16 lamp socket, available on Amazon: [https://amzn.to/3NrUAvW](https://amzn.to/3NrUAvW)

and Led Light 12 V : [https://amzn.to/4044YBq](https://amzn.to/4044YBq)

For this second option you need adapter which look like this in the lamp

Have Fun :)

Media:

Check at 1:55

Tik Tok

[https://vm.tiktok.com/ZNdngM5Un/](https://vm.tiktok.com/ZNdngM5Un/)