Hey all, still having fun with this along with my little one and others seem to be enjoying this as well.  As a result, I am going to continue to make different pieces to add to the collection. This is the first addition in the form of an s-curve and a sloping curve. These were the first two pieces that I felt like we were missing from the original set, so here they are! I will be leaving a profile with both pieces and their mirrored twin for a total of 4 pieces, but will also leave the stl files for both pieces so you can do with them as you wish. I hope you all continue to have as much fun with this system as we do. thanks and happy printing!!

ATTN!! This is an expansion set. You will need the core set and some of the many other sets available in order for these pieces to be useful. I have links below for the core set and a collection with all sets from Pete and Myself.

Core Set          [https://makerworld.com/en/models/645420#profileId-571629](https://makerworld.com/en/models/645420#profileId-571629)

Collection with all other sets      [https://makerworld.com/@C7Modeling/collections/2726752](https://makerworld.com/@C7Modeling/collections/2726752)

ATTN: I would not recommend using any filaments that have a tendency to swell or have poor layer adhesion like silks or dual extrusion. I had ZERO issues using basic or pro PLA from Bambu and Polymaker, but when I tried a dual extrusion PLA from another brand, I did have an issue with the tabs on the bridge pieces getting stuck and breaking off. Maybe just try printing a couple test pieces with your filament of choice first.

All the Filaments I used here are Polymaker Luminous PLA (this stuff is the best glow in the dark Ive ever used period)