The E.V.A. figurine is a fully articulated model, allowing for a wide range of motion and posing. The assembly requires M2 x 8mm and M2 x 10mm screws, along with M2 nuts, ensuring durability and flexibility in the joints.

Visit my 3d Printing Essentials list in notion: Essentials List :)

Note: This is only the E.V.A. Model, the Accessories are in this other Model: E.V.A. Accessories Pack

Notice: This is a Hard Level Build I printed elbow joints twice and had the do post-processing work to fit parts together, once its done is very satisfying. I recommend medium force tightening with the bolts and trying out the joint movement.

Printing Recommendations

To achieve the best results, consider the following settings:

• Materials:
  • Frame Material: I recommend PETG for its flexibility and durability—perfect for articulated figures.
    • Get it here: PETG Filament
  • Armor Material: Feel free to use any PLA color for the armor pieces; full customization is possible!
    • My choice: PLA Filament
  • Screws: Make sure to get your M2 screws and nuts here:
    • M2 Screws & Nuts
  • Note: I added a thin layer of hair spray to each bed to help with adhesion. Here is the one I use: Hair Spray
• Supports: Utilize auto-generated tree supports to ensure proper overhang support without excessive material usage.
• Brim Settings: Apply an outer brim only, with a 5mm width and a 0.1mm gap from the object, to enhance bed adhesion and prevent warping.
• Layer Height: Set to 0.16mm to balance print quality and time efficiency.

These are affiliate links, and any purchase made through them helps support my work at no extra cost to you! 🙏

Let me know if you have any questions about the build or print settings, and feel free to share your completed E.V.A. builds with me! 😄

Assembly Guide:

Project Originally comes from user AGuywithLaptopAnd3dPrinter.