This is Version 3 of my Friction Fit Frame

50% Slimmer than the previous versions, but still needs no glue or backing bars to hold your print in place!

If you'd prefer one of the other versions you can find them in this collection here:
[https://makerworld.com/en/collections/1027330](https://makerworld.com/en/collections/1027330)

NOTE: There are two print profiles:

• Main profile - All three frames - Each one on its own plate
  • Updated Dec 6, 2024 - Added 150x225 and 150x200 Frames 
  • Updated Mar 30, 2025 - Added a second hanging hole for 150x225 
  • Updated April 2, 2025 - Added a second hanging hole for 200x200 
  • Updated June 19, 2025 - Added a 100x200 frame
  • Updated August 3, 2025 - Added a 120x120 frame
• Multi-Frame - 4 plates, each with a different combination of square frames, including one plate with all three sizes for efficiency.

If you'd like to sell my frames please visit my Patreon where you can sign up for a commercial license.

This will fit all my 200x200mm Hueforge designs, and requires no bars, no glue, and no fiddling to hold your hueforge in place. Just insert the hueforge into the inner slot, and slightly flex the top to click it into place. It will stay there until you want to change it out.

As long as the final hueforge is between 1.5mm to 3mm thick it should be fine in this frame, all of my designs will fall in the middle of that range.

100x200mm Frame will fit the Panels I've been building