Project: wolfdreamcatcher.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    PLA Hatchbox Purple Transmission Distance: 2.6
    PLA Kexcelled Sky Blue Transmission Distance: 2.6
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #11 (0.96mm) swap to Purple
    At layer #15 (1.28mm) swap to Sky Blue
    At layer #19 (1.6mm) swap to Jade White for the rest.