Witch Hello Kitty

this is a continuation of the Halloween theme

tips & info:

• Please use my profile as they are tuned with the correct support needed for a proper print.
  • i have tuned the profile to use as little support as possible so its much easier to remove and keeping a quality print.
• Print more than 1 just incase one fails you still have the other one =) it only adds about 10-15% extra time for each one you add
  • use any color you like.
  • Scale it up as big as you like.
• Simple way to gain some quality without adding lot of time is to change layer height as it only adds about 5-10% extra time.
• Please use pliers to remove the supports from main body.

Assembly is straight forward

i suggest gluing the bow and cape. just put a tiny dab on the insert pins.

i made it so its a tight fit but you can scale it up or down to get the fitment right.

they can be assembled without glue but getting tolerance correct can be finicky without good calibration of your filaments.

( Please keep in mind that all printers and filaments are different. they can vary in tolerance and shrinkage)