Experimental project

This set of L E G O compatible plates is designed to offer some custom non-official baseplate sizes, featuring L E G O studs sized at 2.450mm, slightly larger than the standard 2.4mm studs found in official L E G O pieces. While L E G O studs are manufactured with precise tolerances using methods like injection molding, 3D printing can introduce small variations based on printer and filament.

The model is optimized for Bambulab A1 Mini with Overture PLA Matte white, using an X-Y contour compensation of 0.05mm for the best fit.

I recommend printing a small test piece to ensure your figurines fit securely. If the fit is loose, increase the X-Y contour compensation; if too tight, decrease it or set it to 0.

AVAILABLE SIZES

• 2x2
• 2x4
• 2x8
• 2x10
• 4x4
• 4x6
• 4x8
• 4x10
• 5x5
• 6x6
• 8x8
• 10x5
• 10x10
• 15x5
• 20x5
• 20x10
• 20x15
• 20x20

PRINT RECOMMENDATIONS

• level your bed
• do not remove the print from the plate while it still warm