Filament Spool Meter

How much filament remains on your spool ? 200 or 400 g ? (*)

Simply use this perfectly calibrated meter to estimate the remaining filament. Optimized for Bambu Lab spools, available with single scale (standard) or dual scales for various filament types (one on each side, approximately 12.5 % difference) :

Standard (PLA/PETG/PC/TPU)
ABS / ASA

Available with holes of 20/16/15/12/10/9/8/7 mm for magnet or hook.

As shown by the pictures, faced down numbers were made deep enough for a textured build plate; a smooth plate will give even better results.

Note on magnets : holes were designed with the exact specified dimensions, but manufacturers may slightly differ from the exact sizes.

(*) Scale indicates the remaining weight in 100 g. For example, 2 stands for 200 g, etc.

-→ SEE NEW PRINT PROFILE SINGLE SIDE WITH EXTRUDED NUMBERS MADE BY DAREDEWIL !

(**) There is also a Spool Meter Version 4.0, Front Readable

(**) There is also a Spool Meter Version 2.0, with Dual or Single Scale

(**) There is also a Spool Meter Version 1.0 with single scale optimized for PLA

This slimmer version was inspired from Northeast Tiger remix of the original Spool Meter - please have a look at his creations.

Descrição