Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
This is 4 color Hueforge of abstract painting of Solid Snake from Metal Gear series of games.
I encourage you to experiment with different colors in Hueforges, it can lead to amazing outcomes.
I uploaded two sizes 200x200 X1/P1/A1 and size 180x180 for A1 Mini.
And thinner version with border size 200x200. Swap instructions in profile description.
Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Spectrum Signal Violet Transmission Distance: 2
PLA JamgHe Green Transmission Distance: 3
PLA Sunlu Matte White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Signal Violet
At layer #12 (1.04mm) swap to Green
At layer #15 (1.28mm) swap to White for the rest.
