A faceted lamp shade that can uses an e14 socket.

The shade is 180 mm height x 200 Width.

With the base, the lamp is 300 mm height and 220 mm wide.

No supports required.

The fassung-lamp socket ( e14-28 mm):
[https://www.amazon.de/dp/B097K4YNL9](https://www.amazon.de/dp/B097K4YNL9)

The electrical cable and switch:
[https://www.amazon.de/dp/B002DAOX58](https://www.amazon.de/dp/B002DAOX58)

The E14 Bulb used here:

[https://www.ikea.com/de/de/p/solhetta-led-leuchtmittel-e14-470-lm-rund-opalweiss-90498707/](https://www.ikea.com/de/de/p/solhetta-led-leuchtmittel-e14-470-lm-rund-opalweiss-90498707/)

The slicer settings for the base and the tall neck:

.20 mm Standard and

(All standard settings and speeds, Random seam settings

Filament: Eryone PLA+ Matte Black

The shade itself was printed using a white PLA..

Sunlu PLA+ White

The slicer settings:

.16 mm High Quality and Generic PLA
Infill % - 30 , Gyroid
Wall Loops - 8
Top Shell - 8
Bottom Shell - 6
Outer Wall Speed - 60 mm/s
Inner Wall - 150 mm/s

Seam Position- Aligned