I am removing this model from MakerWorld because of Bambu Lab's anti-consumer business practices. It can now be found on Printables. [https://www.printables.com/model/1167717-parametric-box](https://www.printables.com/model/1167717-parametric-box) The same print profile will be uploaded there so you should be able to download it and open it in Bambu Studio or Orca Slicer with no issues. I apologise for any inconveniences this may cause. 

There are two sizes of this box (note that these are the inside dimensions):

• 200x100x65mm
• 165x80x65mm

There is also a parametric Fusion 360 file so you can change the size of the box if the included sizes don't suit.

Only the smaller box will fit on the a1 mini.

This print does not require any non-3D printed parts.

I printed it in Polyterra PLA with 3 walls, 20% infill and 0.2mm layer height. I used fuzzy skin on the white one which worked well, and I have included the settings for that in the print profiles. Shown below is the correct orientation for the print.

Bellow is an example of an insert which I made for the box. The round rails in the center of the box are so you can have a divider in the center, or an insert on one side without it sliding to the other side.