Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 53.87x152.4mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 3.5

This print uses 4 unique filaments

Swap Instructions:
Start with Charcoal
At layer #8 (0.72mm) swap to Blue Gray
At layer #12 (1.04mm) swap to Gray
At layer #18 (1.52mm) swap to Ivory White for the rest.