I like the dub better, personally. But to this day hearing “Watashi wa Erru desu” still gives me goosebumps.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

The Model is 200x175.47mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 3mm and the Actual Depth is 2.1mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 2.6
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite Pro Cold White Transmission Distance: 0.5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #32 (1.48mm) swap to Blue Gray
At layer #35 (1.6mm) swap to Grey
At layer #46 (2.04mm) swap to Cold White for the rest.