This 3D Printed tool set is an ultimate addition to your workspace if you need sanding/polishing/cleaning on a small level, which is perfect for 3D Prints!

--------

Included:

1. The Base - Holds all tools and can be fitted with 8x2mm magnets for the magnetic hand tools and has a slot for a Dremel wrench/chuck key.

2. 6 Small Hand Tools - Can also be fitted with 8x2mm magnets. These tools are perfect for small sand/polish/cleaning jobs.

3. 7 Hand Tools - These tools are bigger and cover more surface area when it comes to sanding/polishing or cleaning.

4. 3 Dremel Rotary Sanding/Polishing wheels WITH a 3mm Shank - Not recommended, only use if you don't own the appropriate Dremel Bits.

5. 3 Dremel Rotary Sanding/Polishing wheels WITHOUT 3mm Shank - Meant to fit existing Dremel bits.

6. 2 Templates - These templates can be used to mark out sand paper to then cut-out for use with each one of the 13 hand tools and 2 Sanding/Polishing wheels.

7. 1 Container - Store your favorite polishing compound or cleaner

--------

After 3D Printing, apply double sided sticky tape to the tool face. Run tape long over the face and cut excess off with a fresh razor blade. I recommend super gluing the tape to the tool, then cleaning the opposite face with water before initial use to avoid permanently sticking to sandpaper/clothe.

--------

Stop working your fingers to the bone and use a tool that really helps!

Follow on Instagram @3DPDLV