Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 112.52x200mm in size
You may print at higher layer heights below the Min Depth of 1.5mm
The Max Depth is 3.3mm and the Actual Depth is 3.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Orange Transmission Distance: 5.3
PLA BambuLab Basic Blue Gray Transmission Distance: 4.5
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #21 (1.76mm) swap to Orange
At layer #26 (2.16mm) swap to Blue Gray
At layer #29 (2.4mm) swap to White for the rest.