支持定制

Support customization

背面为标准螺母孔，需要准备相应的螺母，Demo中为M5螺母。

The back side has a standard nut hole, and corresponding nuts need to be prepared. In the demo, it's an M5 nut.

图中支架为模型支架，购买地址参考：

The bracket in the picture is a model support. As follows:

Taobao：

[https://item.taobao.com/item.htm?abbucket=4&id=730024869374&ns=1&priceTId=2147801c17271950926022588ed628&skuId=5057592732610&spm=a21n57.1.item.7.bc81523cJ7KdRH&utparam=%7B%22aplus_abtest%22%3A%22b8d910d7ff6c6c5e86e04cb0455dbf9f%22%7D](https://item.taobao.com/item.htm?abbucket=4&id=730024869374&ns=1&priceTId=2147801c17271950926022588ed628&skuId=5057592732610&spm=a21n57.1.item.7.bc81523cJ7KdRH&utparam=%7B%22aplus_abtest%22%3A%22b8d910d7ff6c6c5e86e04cb0455dbf9f%22%7D)

Amazon：

[https://www.amazon.com/Yocoolfun-Figures-Display-Support-Screwdriver/dp/B0D1JF9PSH/ref=sr_1_19?sr=8-19](https://www.amazon.com/Yocoolfun-Figures-Display-Support-Screwdriver/dp/B0D1JF9PSH/ref=sr_1_19?sr=8-19)

宜家洞洞板需要一起打印挂钩项目 / IKEA SKÅDIS need to print this project：

[https://makerworld.com/en/models/484125](https://makerworld.com/en/models/484125)

非宜家洞洞板请打印这个项目/Non-IKEA hole board please print another project:

[https://makerworld.com/en/models/611956](https://makerworld.com/en/models/611956)