Here's my first Hueforge attempt, it turned out pretty well! It's a Wolverine Hueforge Print that only uses four colors and can be done without AMS you just have to build pauses in and swap out filaments.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200 mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.32 mm and the Actual Depth is 2.4mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA Polylite Azure Blue Transmission Distance: 3
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Charcoal
At layer #9 swap to Blue Gray
At layer #16 swap to Silver
At layer #21 swap to Jade White for the rest.