Monstertech offers HOTAS mounts for Seats so you can quickly add your HOTAS system to your chair without permanently mounting it.

Unfortunately, the holder-brackets stick out pretty far and you have to be careful with your furniture and kids / pets.

I designed TPU Bumpers to slide over them and lock in place with a little nubbin.

To remove, just squeeze the bumper and wiggle it.

Print times are pretty hefty due to TPU speed limits.

Printsettings:

• Print orientation: Upright
• Speeds: 30-50mm/s
• 5-10% Gyroid Infill
• 2-3 Walls

The Print time is approx. 5 hours per piece with slow TPU speeds on the X1C.

With the new High-Speed TPU it should be reduced dramatically.