This is 4 colour Hueforge of AH-64E Apache helicopter.

I uploaded two sizes 200x125 X1/P1/A1 and size 180x112 for A1 Mini.

Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.

If you want stand for this print check out my Simple vertical stand.
For my Hueforge pictures with border choose the version with 3 mm gap.

If you like this picture, you can look at my other military pictures here in this collection:

[https://makerworld.com/en/collections/3529142](https://makerworld.com/en/collections/3529142)

Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA DevilDesign Gray Transmission Distance: 1.7
PLA Sunlu Matte White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Blue Gray
At layer #11 (0.96mm) swap to Gray
At layer #16 (1.36mm) swap to White for the rest.