A pixel clock printed on the A1 mini without AMS.

Dimensions:

170 mm x 170 mm x 35 mm

Assembly:

There are 2 pieces fit together, no glue needed. It is held together by the screw on the clock component. The clock hands may be too tight if your printer is not calibrated correctly. If this is the case, deburring tool or knife may help to enlarge the holes a bit. On the other side, if the hands are too loose, let me know and I modify them for you.

Printing:

Clean your print bed before printing to avoid adhesion problems. After printing wait till the bed cools down to avoid warping.

Clock component:

The donor of the clock component was an old clock, but the component has the same dimensions as the one sold on Bambu Lab.