So here is my version of the A1 drawer riser.. i was inspired by maCyo42 AMS riser.. so i kinda followed his style of designing them..

The riser fits with the A1 printer base and rises the printer about 95mm.. it comes with 2 drawers in front and another 2 drawers on the sides at the back as optionals.. Just print the panel provided if you dont want the drawers on the sides..

The riser is connected using long pegs.. but you can also glue the parts together

There are optional inserts for the drawers as well as the front drawer panels.. you can print the plain pattern or with the Bambu Lab logo.. the drawer inserts have 2 options.. Nozzle holder or just partition.. if you want to print it with a grid like mine.. you can see download the profile that i dedicated just for the inserts..

The risers are all ventilated so that air could pass through the bottom of the printer.. There are also 2 slots for buildplates..

And since you need to remove the rubber bumper on the back to insert the printer into the riser.. i made an optional print of the bumper integrated to the riser.. The bumper and A1 riser feet can be printed using TPU.. currently i'm just using a generic TPU 95A filament from local store..

Printed the whole riser using Bambu Lab PETG HF filament.. using grey, black and white.. you could change the black color to green to match the Bambu Lab theme color.. for the basic without the optional.. you'll need:

• PETG HF grey - 1.5kg
• PETG HF black/green - 150g
• PETG HF white  - 500g
• TPU 95A - 50g

If you want to use the bambu filament.. please use my affiliate link to buy them..

• PETG HF grey - [https://shrsl.com/4oowx](https://shrsl.com/4oowx)
• PETG HF black - [https://shrsl.com/4oox0](https://shrsl.com/4oox0)
• PETG HF white - [https://shrsl.com/4oox5](https://shrsl.com/4oox5)
• PETG HF green - [https://shrsl.com/4oox6](https://shrsl.com/4oox6)

I also made a poop bucket that aligns to the A1 riser.. you can use 10mm neodyme round magnets to lock them in place.. I also added a poop guard so it drops down to the bucket.. both have the same design and look as the A1 riser..

I kinda like the riser since it makes the A1 printer slightly higher on my table.. so i dont have to bend so much trying to reach the printer..

Anyway.. i hope you'll like my A1 drawer riser..

I also made a LED version that has switches to control add-on LED light strips to the A1.. You can get it here at my shop..

[https://buymeacoffee.com/fay3dlab/e/303781](https://buymeacoffee.com/fay3dlab/e/303781)