Technoblade never dies!

In memory of Alex I modelled his crown in blender on the train to uni one day. I have attached 2 versions, one with the gems separate and one attached. The gems should friction fit in with a little force, as I did in the images, but it may be worth scaling them down 0.5% and attaching them with glue. I recommend printing with some extra walls to ensure nothing breaks.

The default size is quite small (the exterior length of the crown without the gems is 10cm) so you will have to manually scale it. I would recommend manually setting the length of one axes in the slicer to the distance between the front and back of your head, plus ~3.5cm (to account for the interior width) and then using whatever scale that is for the gems. For me this ended up being roughly 230%.

If you happen to own two ams units and decide to print with all the gems attached, feel free to upload the profile!

These are the gems you need to print off

4x light blue

1x dark blue

5x green

4x red

3x purple

If you give this a print please send a photo!

I have also modelled a Techno themed cup coaster, which you may also be interested in!