In Beta - Currently Under Development. Please consider commenting, rating, and/or boosting to support more development!

Rapidly create custom holders for single round items. 

Want to store multiple round items on a single holder? Check out the round item row generator!

Customize: 

• Rim Height
• Diameter
• Depth
• Back Height
• Rim Thickness
• and more!

Looking for other parts? Check out the rest of my Multiconnect Part Generator Collection!

Available Part Types:

• Gridfinity Shelf (new!)
• Round Item Holder (Single) (this part)
• Round Items (Row) (new!)
• Flat Shelf
• Bin
• Item Holder
• Hook

Ideas? 

Please share your thoughts and ideas in the comments!

Find this helpful? 

Please consider boosting to fund the effort!

Narrow Parts?

If your holder is narrow with only one multiconnect slot, I remixed a non-rotating threaded connector for Multiboard. You can use any multiconnect holder to crank it down so your parts don't rotate. 

Documentation

Documentation is available, but extremely limited. Most parameters should be self-explanatory. I will continue to develop the documentation as I get to version 1.0.  

Background

Needing a better organization system, I found Hands on Katie with an organization structure that resonated. She recommended an approach that, when combined, take care of most storage needs: big, small, horizontal, and vertical. It consists of Multiboard, Multiconnect, Neogrid, Gridfinity, Underware Cable Management, and French Cleats.

I dove head-first into the first category: small things on the wall with Multiboard and Multiconnect. But I quickly encountered a problem - I was spending a LOT of time either looking for the holder that I needed or uniquely designing for each and item. It started with rectangular items where I found myself only tweaking a few spots in Fusion 360 and adding/removing Multiconnect slots. I kept thinking that there has got to be a better way to make these adjustments. Then I learned of parametrics: designing in such a way that parts are rapidly customizable by entering a few parameters and the rest of the object dynamically changing to accommodate those parameters. 

It started in Fusion 360, which is very powerful, but as I made my first models I developed 2 goals: (1) I wanted to share them with the community and (2) I wanted it easily accessible to everyone (and I knew the pain and hardware requirements of getting Fusion 360 up and running with the hobby license). Here comes OpenSCAD and MakerWorld: a way to programmatically design and host parametric 3D objects.  

This is the result of that goal - fast, standardized, and web-based methods of generating the exact holders you need in a one-stop shop. 

Have requests or suggestions? Please leave them in the comments! 

Remix Source

This item is remixed from DavidD's multiconnect system. It takes the multiconnect slot (and options) and places them where needed along the back of this part. 

Change Log

• 2024-09-18 - Initial Release
• 2024-12-20
  • Bottom Cutout
  • Offset from back
  • Thanks to momentmal on GitHub for these changes!
• 2025-03-11
  • Hole Cutout and Slot Cutout added (thanks @user_3620134323)
• 2025-07
• 2025-07-15
     - New Multiconnect v2 option added with improved holding (thanks @dontic on GitHub!)
• 2025-07-19 @timtucker
     - Curved support structure (should be stronger, print faster, and use less filament)
     - Allow oval objects
     - Allow generation of rectangular items
     - Allow the hole / slot to be repositioned
     - Prevent the hole / slot from extending into the back wall
     - Allow tuning for the number of slots wide / high
     - Allow tuning of the resolution of circles and curves
     - Simplify / reorganize parameters
• 2025-07-19
     - Add ability to have cutout go out the back of the slots
• 2025-07-26
     - New backs (Multipoint, openGrid)

Credits 

• @DavidD for the Multiconnect system
• Jonathan (KeepMaking) for creating multiboard
• Katie and her community at Hands on Katie
• @ralusek for the multiconnect on-ramp/quick-connect specs
•