Another “Art Deco” Hueforge : Hellboy

The dimensions are 180x180 mm so it fits nicely in a square frame.

You can print frames that are compatible with my “Art Deco” Hueforges via this link :

[https://makerworld.com/en/models/194571](https://makerworld.com/en/models/194571)

Colors Used :

Black → Red→ Yellow → White

I changed the thickness of the base layer, now it's 1 mm, this creates a much stronger/durable end result.

I added a Height Range Modifier so that first 1mm gets printed at 0.2 layer height (instead of 0.04). This also results in a faster print result.

ps : The prime tower is back (some users had issues without it) you can disable if you want…

For people who want to slice the files manually, please use thing settings (with all layers being 0.04). You do NOT need to do this if you download my BambuStudio 3MF file, only when you use the STL

Swap Instructions:
Start with Black
At layer #28 (1.12mm) swap to Red
At layer #34 (1.36mm) swap to Yellow
At layer #45 (1.8mm) swap to Jade White for the rest.

If you want to support my work & creativity you could join my Patreon : [https://www.patreon.com/3deekes](https://www.patreon.com/3deekes)