Landscapes - Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 157.97x160mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 1.5mm and the Actual Depth is 1.5mm

Filaments Used:
    PLA+ Sunlu Black Transmission Distance: 0.6
    PLA+ Sunlu Grey Transmission Distance: 2
    PLA+ Sunlu Silver Transmission Distance: 2
    PLA+ Sunlu White Transmission Distance: 5
 

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Grey
    At layer #13 (1.12mm) swap to Silver
    At layer #16 (1.36mm) swap to White for the rest.

After printing use a lighter/ torch, by quickly passing the printed parts you will get rid of the tiny stringing on these type of prints.

Thanks!