PLEASE USE WITH CAUTION. THIS IS A 3D-PRINTED KNIFE AFTERALL. IT SHOULD ONLY BE USED FOR LIGHT DUTY APPLICATIONS. BE MINDFUL OF THE BLADE AS YOU OPEN AND CLOSE THE KNIFE.

Version 2.0 is really version 2.0 and 3.0 combined. One knife has a keychain loop (and has a place for storing 2 extra blades), and the other knife has a belt clip (can hold 1 extra blade). Both knives use 6mmx2mm magnets (You'll need 5 or 6 of them depending on model). Please don't cheap out on the magnets - you want really strong ones. I use these from Amazon and have had really good luck - [https://www.amazon.com/dp/B07CVPC3YJ?ref=ppx_yo2ov_dt_b_fed_asin_title](https://www.amazon.com/dp/B07CVPC3YJ?ref=ppx_yo2ov_dt_b_fed_asin_title)

The “Knife Holder” and “Belt Clip” parts should be printed in PETG or another filament that has springiness. Don't use PLA for these parts.

These print setting work best: 0.2 layer height, 3 walls, Classic wall generator (don't use Arachne), 100% infill, and a 38° Infill Direction.

Here is a link to the first (minimalist) version: [https://makerworld.com/en/models/624973#profileId-549385](https://makerworld.com/en/models/624973#profileId-549385)

Assembly instructions for the belt clip and magnets below in the youtube video…