HalfWidth stackable expandable storage - narrow-body interlocking customizable drawers fully compatible with Tidy System

Mix and match Slim (https://makerworld.com/en/models/632325) and Double Tall (https://makerworld.com/en/models/632341) HalfWidth sizes

The dual grooves allow any HalfWidth body to stack on top of any other, regardless of rail position. Optional groove caps are included to plug the empty hole when only one groove is in use. Left and Right sidedness can be ignored, except when interlocking vertically with the Tidy System (see below). Rails slide in easily and include a friction fit end to prevent shifting once fully connected.

You will need both a body and drawer for each finished unit. several drawer designs are available

HalfWidth A1 accessory kit slim drawer: [https://makerworld.com/en/models/632379](https://makerworld.com/en/models/632379)

HalfWidth labeled swatch inserts for double tall drawer: [https://makerworld.com/en/models/632408](https://makerworld.com/en/models/632408)

HalfWidth top organizers available here: [https://makerworld.com/en/models/632359](https://makerworld.com/en/models/632359)

HalfWidth aesthetic cover plate available here: [https://makerworld.com/en/models/632421](https://makerworld.com/en/models/632421)

HalfWidth two stack mounting plate available here: [https://makerworld.com/en/models/632434](https://makerworld.com/en/models/632434)

HalfWidth Sidecar mounting plate for 3 HalfWidth stacks, or one HalfWidth and one Tidy System full width stack available here: [https://makerworld.com/en/models/632444](https://makerworld.com/en/models/632444)

To vertically interlock with Tidy System full width drawers, ensure HalfWidth bodies meant to be below a Tidy System full width drawer have both a left and right side rail. For full width drawers and modules please see the original Tidy System by TotalChaos. (tidy for a1 mini not compatible)

Mouse ears are included where appropriate, feel free to remove them before printing if you're confident you don't need them to prevent corner lift.

Note: all models are original meshes created from scratch.

Compatible with x1, p1, a1, a1 mini