Modular Kitchen Organizer

This model combines different kitchen accessories like

• Pod/Pan Lid Organizer (mk.4)
• Pan Wall Hook (mk.2)

The model will be complemented as when I see place for improvoment in my own kitchen.

I know, that the space utilization of the vertical lid organizer is not ideal, but it's practical. When it starts bothering me, I'll revise.

You'll find all utilitites in a single project.

Lid Organizer mk.4

This thing is intended to hold pod/pan lids vertically. It's a one-fits-all size and is designed to fit a free standing option as well as fitting in a kitchen cabinet.

It's definitely worth mentioning, that you could print 3 of these on a single plate. Just copy/paste and “arrange” them and you should be good. Tested only with 2 at a time yet.

Rail Connectors

Like in all my other modular models, this utility also comes with my unpatented rail connector system (see picture below). This allows to to connect them to a single unit.

Parameters

As usual, I also attached the original f3d archive. You can modify the following parameters and everything should scale as intended:

• `width_inner` → would ressemble the height of the lid
• `height_inner` → recommended to use (at least) half of the lid's diameter
• `depth_inner` → same as above (half lid diameter)

Pan Wall hook mk.2

Since I also needed a place to hang my pan, here's a parameterized wall hook as well:
 

Parameters

As usual, I also attached the original f3d archive. You can modify the following parameters and everything should scale as intended:

• `hook_depth` → contact surface with the pans grip eyelet
• `hook_height` → Entire height minus hooks thickness
• `hook_width_base` → width at the start of the hook's elevation
• `hook_width_top` → width at the very top of the hook

Community

Join the

KellerLab Discord Server

Support

If you appreciate this model and wanna buy me coffee, you can do so here: [https://ko-fi.com/kellervater](https://ko-fi.com/kellervater)
Or simply scan this QR-Code: