Google Home & Nest Mini socket wall mount

Home & Nest Mini socket wall mount

The socket wall mount for Home Mini and Nest Mini offers you a simple and space-saving way to mount your voice assistant in the kitchen, bathroom, or bedroom.

With the wall mount / holder, you can securely and quickly attach your Home Assistant to the socket without taking up extra space. The direct hanging ensures that you position your voice assistant optimally and keep things tidy. Perfect for having your Home Mini always within reach while maintaining a clean and organized environment.

Before you print

In the next section, I'll help you figure out which print profile is right for your Nest or Home Mini.

The print profile without a country code is valid for all countries except Australia and the UK; I've created two separate print profiles for these countries.

The right print profile

If you are unsure which generation of device you have, I will help you below with some features to differentiate between the devices and determine whether you have a Nest or Home Mini.

Power supply approx. diameter

Once you know which device and print profile you need, you can use the following list to check which power supply size or diameter you have in order to start the correct print.

*side view of the power supply

Changelog

04.12.2024

According to user feedback, the cable channel was a bit too narrow. I have adjusted all models / print profiles so that the cable channel is no longer too narrow and it is easier to insert the cable into it.

31.10.2024

According to user feedback, the Nest Mini for UK and Australia have the same power supply size.

I have adjusted the info text and images of the print profile accordingly so that UK users are informed.

15.10.2024

According to user feedback and test prints, the Home Mini for UK and Australia have the same power supply size.

I have adjusted the info text and images of the print profile accordingly so that UK users are informed.

Thanks for the support to:

@babygigi - [https://makerworld.com/en/@babygigi](https://makerworld.com/en/@babygigi)

01.10.2024

Added print profile for the Home Mini - 1st Gen. for the Australian power adapter.

Thanks for the support to:

@NoahColly - [https://makerworld.com/en/@NoahColly](https://makerworld.com/en/@NoahColly)

29.09.2024

Added print profile for the Nest Mini - 2nd Gen. for the Australian power adapter.

Thanks for the support to:

@NoahColly - [https://makerworld.com/en/@NoahColly](https://makerworld.com/en/@NoahColly)

@maple_on_tour - [https://makerworld.com/en/@maple_on_tour](https://makerworld.com/en/@maple_on_tour)

17.09.2024

The Google Home / Nest Mini wall mount is now available in version 2. Some of the following points have been changed, especially due to user feedback:

The design of the power supply cable routing has been changed
85% fewer supports than before.
The print requires 34% less filament than before.
Print time has been reduced by 28%.
Optical printing result has been improved.

09.09.2024

Released for Google Home Mini and Nest Mini

Descrição

Home & Nest Mini socket wall mount

The right print profile

Power supply approx. diameter

Changelog