Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Lots of great storage solutions for my Bambu Lab spare parts out there but I wanted something with less restrictive internals. This case is completely open on the inside with no dividers. Works great for packs of PTFE tubing, belts, cables, etc. Pretty much anything that does not have to be bound to a certain space.
Construction is solid. (4x) 3mm x 35mm socket head screws and nuts are all you need for the snap lock latch and the rear hinges.
I ran through countless different versions of the snap lock hinge. I wanted it to be as secure as possible while still maintaining functionality. You'll notice, it is a tight fit but with a firm press, it will snap lock right in to place and will not accidently unlatch. I absolutely love the way it turned out and the “snap” of the locking feature is so satisfying.
- The print profile is ready to go with correct settings for a strong latch. However, if you decide to use your own settings, please use a minimum of 30% infill, slower speeds, and PLA+ or better for the latch to assure you have a long lasting, functional, and strong latch.
Below is a link for the 3mm socket heads but there are plenty of other listings available. This assortment has them partially threaded which is perfect for the project.
Check out some of my other storage solutions!
Swatch Box SOLO by Aesth3tix - MakerWorld
Swatch Box A1 by Aesth3tix - MakerWorld
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta