Donate some filament!

an optional way for those who wish to contribute beyond Maker World points.

__________________________________________________________________

About This Model

The full sized (low profile) bases came about due to the need to have the lowest profile base plate possible with magnets for my Gridfinity Universal Toolbox Collection. This is the matching set to the full size bases. These are 0.5 wide and size from 1-6 grids in length. These will work well with my half-grid based trays but for any other standard tray these will most likely only be used as Fillers/borders around the edges in drawers to fill space that wasn't big enough for a full grid.

• 1-6 lengths included in the A1,P1,X1 profile, 1-4 lengths included in the A1 Mini profile
• 6x2 magnet press fit inserts with bottom hole to remove old unused magnets
• only 6.75mm tall
• only adds 2.5mm to the total height of Gridfinity trays when inserted
• Added two L-shaped bases to help with arranging around corners

__________________________________________

__________________________________________________________________

The Gridfinity Universal Toolbox Collection

Use the link above to browse the growing collection of my trays If you have a tray you would like made, please let me know in a DM and I will add it to the list.

Let me know if you have any issues with any of your tools not fitting a tray, let me know so I can resolve it and keep my trays fully universal.

_________________________________________________________________

Thanks for printing!