Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x140.86mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA Bambu Labs Black Transmission Distance: 0.4
PLA Sunlu HS Grey Transmission Distance: 0.8
PLA Bambu Labs Cyan Transmission Distance: 2.3
PLA Sunlu HS White Transmission Distance: 6.1
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Grey
At layer #13 (1.12mm) swap to Cyan
At layer #16 (1.36mm) swap to White for the rest.