Bald Eagle with US Flag and mountain Scene (hueforge). Show your pride in the US with this great print. This is a 6 color print. this is a longer print, but well worth it. the depth of colors and the details are fantastic. Hope you enjoy it.

If you use the above print profile, it's sliced so the bottom layers are thicker to save time (saves about an hour). if you are setting up on a different printer use the information below to set the layers after you slice. Thanks.

See Printing instructions below.

you can scale to any size you want, but make sure you don't change the “Z” axis or it will throw off the color sequence.

Need a way to display theses? check out my Wall Mounted Modular Hueforge Display complete it with the optional Desk Mount

Printing Instructions:

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

The Model is 200x200mm in size

You may print at higher layer heights below the Min Depth of 0.72mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Red Transmission Distance: 4
PLA+ Sunlu Blue Transmission Distance: 4
PLA+ Sunlu White Transmission Distance: 5
PLA+ Sunlu Orange Transmission Distance: 5

This print uses 6 unique filaments

Swap Instructions:
Start with Black
At layer #15 (0.8mm) swap to Brown
At layer #21 (1.04mm) swap to Red
At layer #29 (1.36mm) swap to Blue
At layer #35 (1.6mm) swap to White
At layer #43 (1.92mm) swap to Orange
At layer #49 (2.16mm) swap to White for the rest.