这是一个办公桌超级组合挂钩，拥有22个自定义部件，几乎可以优雅的放置一切文具。
This is a super combination hook for office desks, featuring 22 customizable parts that can elegantly hold almost any stationery.

看到这个比赛我决定整个大活，因为我们大部分时间都在办公室工作桌上，个人很讨厌把东西放在桌面上乱糟糟的感觉，我们需要充分利用这个小隔板把东西放在墙上，于是诞生了一个拼接玩具形式的悬挂组件的想法，类似乐高一般随意拼接，你可以有无限种想法和颜色搭配。这是我建模优化的第四个版本，很好的平衡了精致感和尺寸和打印难度。我测试了公司的四种办公桌均可以兼容，上空轨道的普通办公桌都可以用，下空轨道的暂时不行。大组件做的比较薄，没有很大的承重能力。我知道会有人拿去商用，但我不在意了，这就是开源精神。
Upon seeing this competition, I decided to go all out because most of our time is spent at the office desk, and I personally dislike the cluttered feeling of items on the desk. We need to make full use of this small partition to place things on the wall, which led to the idea of a modular hanging component, similar to LE-GO, allowing for endless combinations and color schemes. This is the fourth version of my model, which strikes a good balance between refinement, size, and print difficulty. I have tested compatibility with four types of office desks in the company, The normal desk on the overhead track can be used, and the one on the lower empty track cannot be used for the time being.Large components are made relatively thin and do not have a lot of load-bearing capacity. I know some may use it for commercial purposes, but I don't mind; that's the spirit of open source.

这里我设计了6种不同高度的悬挂轴（图中红色的部分），分为一层、双层、三层（我猜你们不会需要四层的），绿色部分是16种不同的平台组件，涵盖了各种各样的用途和尺寸，欢迎把你的组合放在评论区让大家抄作业！！
I have designed six different heights of hanging axes (the red parts in the image), divided into single, double, and triple layers (I guess you won't need a quadruple layer). The green parts are 16 different platform components, covering a variety of uses and sizes. Feel free to share your combinations in the comments section for everyone to copy!

下图是我做的一种预设效果：
Below is a preset effect I've created:

需要注意：我的3MF文件是完整套装，请删掉那些你不需要的组件再打印，镂空组件需要一点点支撑，XY外轮廓补偿我开启了-0.05mm，这样会比较方便更换组件，如果需要更加紧密的咬合调整为-0.02mm或者0就行，看你使用的耗材膨胀率。
Please note: My 3MF file is a complete set, so please remove the components you don't need before printing. Hollow components will require a little support. For the XY outline compensation, I've set it to -0.05mm, which will make it easier to replace components. If you need a tighter fit, adjust it to -0.02mm or 0, depending on the expansion rate of the material you're using.

如果很受欢迎的话，我可能会更新上一些乐高兼容凸点？或者大尺寸组件？需要吗？
If this becomes popular, I might consider updating it with LE-GO-compatible studs or larger-sized components. Would you like that?