This fidget utilizes magnets to allow for fidgety toggling! There are a few options to choose from. First, decide what size magnets you want to use - 8x3mm, 10x3mm or 12x3mm. Then choose if you'd like one toggle switch or a pair of them.  

A few things to keep in mind:

• The single toggle requires 4 magnets while the the pair of toggles requires 8
• Although I suggest using whichever size magnets that you have on hand, the size will affect performance
  • The larger the magnet, the more force you will need to toggle
  • Larger magnets give you a snappy response
• These models are designed for press-fitting the magnets in place, but a dot of superglue can be very helpful

Print Settings

No special settings are required.

Assembly Instructions

Insert magnets in the base and toggle. If desired, add a small amount of glue before installing them. Orientation matters! The magnets in the toggle need to be attracted to the magnets in the base.

The following filaments were used in the pictures above:

• Bambu Lab Matte Charcoal PLA
• Bambu Lab Basic Bambu Green PLA

• Bambu Lab Basic Magenta PLA
• Bambu Lab Basic Cyan PLA

• Bambu Lab Metal Iridium Gold PLA
• Bambu Lab Matte Marine Blue PLA

• Bambu Lab Matte Mandarin Orange PLA
• Bambu Lab Basic Red PLA