Description

Modular Bamboo with Square Pot

Comes with 7 variants of Bamboo Stems (4 Stems and 3 Top Stems) and 4 Different leaf designs (2 Mirrored).

I wanted a modular design I could incorporate into different styles of bookends and standalone Pots.

This is part of my collection of Modular Bamboo Pots!

The Plates are laid out with a recommended amount of each item, but you may wish to change the amount as you like, making it custom is the idea after all!

The Build plate is laid out with the Bamboo Stems upside down, I found this to be stronger and a nicer fit when pushing together.

The Soil is also upside down, this is optional, however on a textured plate it gives a nice soil look.

The Pot prints fine with a much lower infill, however if you are going to print it in a lighter colour I would recommend sticking with 15% Infill for light passing through was evident with white at sub 15% infill.

The Leaves push in on a slight angle downwards. The Stem with 2 Side holes, one pushes in downwards, and one upwards.

Print Profiles

AMS Profile - AMS is only used for the Bamboo stems (2 Colours) The whole print is 4 Colours Total.

Non AMS - I have included a profile with a pause after the top (bottom of build plate) of the Stems are printed (light brown) so a colour swap can be made to a green for the remainder of the Bamboo Stem.