The Magnetic Wall Scroll Hanger is an easy way to hang up wall scrolls and posters. The hanger is 52 cm in total. In my test it also worked with a Dakimakura cover.

The hanger consists of 4 printed parts which can be put together later.

You will also need:

- A piece of string
- 16 magnets 10x3mm
- Some super glue

1. print all parts and clip them together

2. glue the magnets into the holes provided. Pay attention to the alignment of the magnets. The components should hold together later.

3. take a piece of string and cut it to a suitable length. Then pull the string through the holes on the holder and tie a knot at both ends.

4. now you can clamp your wallscroll into the hanger and attach it to the wall.

In my case, I printed with PLA and the filament was iron gray from Redline Filament