中秋月饼按键fidget-解压键盘按键

因为非常喜欢@MorphNest3D老师的按键fidget作品（青蛙、猫头鹰和猫爪links1、links2），所以一直很想自己学习创造一些按键fidget。中秋将至，画一些月饼送给大家，祝各位朋友们中秋节快乐！~

Chinese Mid-Autumn Festival Moon cake clicker fidget

Because i really love the clicker fidget works created by dear @MorphNest3D  (the frog and the owl and the cat's paw, links1、links2), so really want to learn to create some clicker fidget. The Mid-Autumn Festival is coming,so i draw some moon cakes for you, and I wish all you a happy Mid-Autumn Festival! ~

单个打印只需30-40min。不同顶盖的花纹和文字图案做了几款，还有几款不同颜色的月饼。推荐用咖啡色、棕色、黄金色类打印最接近经典传统的月饼，也有绿色抹茶、黄金色榴莲、白色冰皮、紫色芋泥。小巧可爱，按键解压，中秋节打印一些当个小礼物送同事送家人应该挺不错。欢迎点赞、收藏、下载打印或评论分享，感谢支持~

A single print only takes 30-40min. Different top patterns and text patterns, and there are different colors version of moon cakes. It is recommended to use brown, yellow and gold to print, to simulate the classic traditional mooncake. And green matcha, yellow gold durian, white ice skin, purple taro paste.It‘s really tiny and cute, Mid-Autumn Festival print some as a small gift to colleagues and family should be very good. Welcome to like, favorite, download, print or comment to share, thank you for your support ~

轴体推荐：

1.亲测有声轴或静音轴的声音效果都不错（段落轴或线性轴也均可），我个人都很喜欢，请根据您个人喜好使用吧，喜欢清脆明亮声音的选择青轴一类的有声段落轴，喜欢声音沉稳一点的可以黑红轴类。tb或pdd找便宜的买就行了。

2.请使用普通十字状的轴体，带有防尘边的轴体估计不好安装或者会点击不顺畅。

Please use MX mechanical switches

安装建议：

1.请剪掉盖子里面的4个长条小揪揪

2.请注意安装方向，十字形状结构有一边是较长的，对应轴体的长边。

3.如果大小有点不合适请适当扩孔或补洞，如果依然很糟糕，建议参数改改补偿，抱歉。

Installation suggestions:

1. Please cut off the four long strips inside the cap

2. Please pay attention to the installation direction. One side of the cross shape structure is longer, corresponding to the long side of the switch.

3. If the size is a little inappropriate, please enlarge or fill holes appropriately. If it is still bad, it is recommended to change the parameters to compensate, sorry.

参数设置：

可以直接使用我提供的模型文件直接打印，已经设置好了参数

1.[质量]：墙生成器：选择【Arachne】（为了打印顶面更清晰的纹路而开启，如果不开启该项，切片之后可能缺失部分花纹，请注意）；墙顺序：选择【外墙/内墙】（为了弱化底座中间过渡的小缝儿，如果不开启该项，中间过渡的位置会出现明显的凸起）

2.[强度]：稀疏填充密度：默认【15%】。您也可以根据需要修改为100%或其他。亲测质量越大，腔体的声音越沉稳，反之质量越小，腔体声音越清脆。

Parameter setting:

You can print directly using the model file I provided, and the parameters have been set

1.[Quality] : Wall generator: select [Arachne] (in order to print the top surface more clear lines to open, if not open this item, the slice may be missing part of the pattern, please note); Wall order: Select [external wall/internal wall] (In order to weaken the small gap in the middle of the base transition, if the item is not opened, the position of the middle transition will appear obvious convex)

2.[Strength] : Sparse filling density: default [15%]. You can also change it to 100% or other as needed. The larger the parent mass, the more stable the sound of the cavity, whereas the smaller the mass, the clearer the sound of the cavity.

耗材选择：

我使用PLA打印测试，未测PETG，如果出现孔洞过大或过小问题劳烦您微调一下孔洞补偿

Consumables selection:

I used PLA printing, did not test PETG. If the hole is too large or too small, please adjust it.

二创建议：

模型文件中含有一套空白的盖子和底座，欢迎二创，使用切片软件修改自己喜欢的花纹或文字吧。导入svg进行合并，或负零件做成凹纹，或者多色打印均可。

Re-creation suggestion:

Model file contains a set of blank cap and base,you can re-create it easily, modify your favorite pattern or text. Import svg for merging, or use negative parts to make a concave, or multi-color printing.

这是我学习建模的第九个模型，使用fusion360，建模技术还没有很成熟，如果您打印遇到什么问题我非常抱歉，望多包涵，感谢支持，非常感谢～

This is my 9th model since I learned modeling, using fusion360. my modeling technology is not well yet, if you have any problems in printing, I am very sorry for that, please forgive me, thank you, enjoy it~