Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Deadpool Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 1.3mm
The Max Depth is 3mm and the Actual Depth is 2.8mm
***attached .3mf file prints the first 6 layers at 0.2mm then the rest at 0.08mm for faster print time***
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA PolyLite Wine Red Transmission Distance: 1
PLA PolyLite Pro Light Red Transmission Distance: 1
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #19 (1.6mm) swap to Jade White
At layer #24 (2mm) swap to Wine Red
At layer #27 (2.24mm) swap to Light Red
At layer #29 (2.4mm) swap to Jade White for the rest.
Check out my Hueforge Display Collection here (Frames, Stands, Book Nooks)
Check out my other models and hueforge files here
Don't forget to post pictures of your prints! Enjoy!
