Lady Deadpool Variant Hueforge

Hueforge file of a Lady Deadpool variant. Enjoy!

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 3mm and the Actual Depth is 3.1mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA PolyLite Red Transmission Distance: 1.5
PLA PolyLite Pro Light Red Transmission Distance: 1
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Beige Transmission Distance: 8
PLA PolyLite Cream Transmission Distance: 2
This print uses 8 unique filaments

Swap Instructions:
Start with Black
At layer #23 (1.04mm) swap to Gray
At layer #25 (1.12mm) swap to Jade White
At layer #27 (1.2mm) swap to Black
At layer #32 (1.4mm) swap to Red
At layer #35 (1.52mm) swap to Light Red
At layer #36 (1.56mm) swap to Jade White
At layer #51 (2.16mm) swap to Silver
At layer #52 (2.2mm) swap to Gray
At layer #58 (2.44mm) swap to Beige
At layer #59 (2.48mm) swap to Cream
At layer #62 (2.6mm) swap to Jade White for the rest.

Check out my Hueforge Display Collection here (Frames, Stands, Book Nooks)

Check out my other models and hueforge files here

Don't forget to post pictures of your prints! Enjoy!

Descrição