***Notice, This print requires a .2mm nozzle and 0.02mm layer heights, it will take 72 hours to print***

Print at 100% infill with a layer height of 0.02mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.7mm

Filaments Used:
PLA+ Numakers Pitch Black Transmission Distance: 0.8
PLA+ Numakers Dark Grey Transmission Distance: 4.8
PLA+ Numakers Light Gray Transmission Distance: 3.2
PLA+ Numakers Pure White Transmission Distance: 4.8
PLA+ Numakers Nuclear Red Transmission Distance: 2.8
PLA+ Numakers Lemon Yellow Transmission Distance: 11
PLA+ Numakers Royal Blue Transmission Distance: 3.2

This print uses 10 unique filaments

Swap Instructions:
Start with Pitch Black
At layer #24 (0.62mm) swap to Dark Grey
At layer #25 (0.64mm) swap to Light Gray
At layer #28 (0.7mm) swap to Pure White
At layer #29 (0.72mm) swap to Nuclear Red
At layer #37 (0.88mm) swap to Pure White
At layer #40 (0.94mm) swap to Lemon Yellow
At layer #45 (1.04mm) swap to Pure White
At layer #48 (1.1mm) swap to Pitch Black
At layer #49 (1.12mm) swap to Royal Blue
At layer #57 (1.28mm) swap to Pure White for the rest.