Explain:
说明：
1. The pressing force of the buttons in this model is provided by the repulsive force of magnets with the same magnetic properties;
1、本模型按键的按压力由相同磁性的磁铁反斥力提供；
2. You can press freely like playing an arcade game console, and even use your fists to strike;
2、可以尽情的按压就像是玩街机游戏机，甚至可以使用拳头敲打；
3. This model requires the use of two magnets with a diameter of 10mm and a thickness of ≤ 3mm;
3、本模型需要使用直径10mm，厚度≤3mm的磁铁2个；
4. The thicker the magnet, the greater the pressing force;
4、磁铁厚度越大，按压的力度越大；
5. If magnets with a thickness of 1.5mm or less are used, the support in the following figure can be left intact.
5、如使用厚度1.5mm及以下的磁铁，下图中的支撑可以不拆除。

Installation steps:
安装步骤：

1. Add magnet to component B;
1、零件B加入磁铁；

2. Part A is pressed into part B, and a little glue can be used for long-lasting stability;
2、零件A压入零件B，为了能持久牢固，可以使用一点胶水；

3. Place AB into part D;
3、将AB放入零件D；

4. Press part C onto ABD, which is the area of the entire model that requires the most adhesive, as using a 3MM magnet with too much force can easily cause C to fall off. However, using a small amount of adhesive is sufficient, and try not to cause the adhesive to overflow;
4、将零件C按压到ABD，这是整个模型最需要使用胶水的地方，因为用3MM的磁铁，力量太大容易使C脱落，但是使用一点点胶水就行了，尽量不要造成胶水外溢；

5. Place the magnet into part E, ensuring that the magnet used in step 1 has repulsive force;
5、将磁铁放入零件E，保证跟步骤1使用的磁铁是具有排斥力；

6. Press ABCD into part E.
6、将ABCD压入零件E。