Flower pot with simple design

There is also a self-watering version of this pot. You can find it here:

[https://makerworld.com/en/models/598408#profileId-520494](https://makerworld.com/en/models/598408#profileId-520494)

In addition to the plant pot, the printing profile also includes a matching inner pot.
I have provided different profiles to offer the pot in different sizes. If you need your own size, it's best to download the 100% profile and scale from there.

These are the dimensions of the 100% profile:

Together with the inner pot, these are the dimensions:

Of course, you don't necessarily have to print the inner pot - it just has the right dimensions if you don't have such an inner pot :)

Scaling table

Here you can see different scales and their respective diameters. Please make sure to always scale both objects and all dimensions equally - otherwise the two parts will not fit together in the end.
I must also emphasize that I have only printed the sizes from the print profiles myself - so scaling too small or too large can possibly lead to problems that have not happened to me so far.

I have built in a few millimeters of tolerances (see model drawings) - for the table I take a 15cm diameter for the 100% profile.

If you've never had to scale before

It's not difficult. Load the 100% profile in Bambu Studio, click on the objects (the two pots) and scale like this: