DragonBall Mr.Satan

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.27mm

The Model is 104.65x140.91mm in size

You may print at higher layer heights below the Min Depth of 0.28mm

The Max Depth is 1.6mm and the Actual Depth is 1.5mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA Sunlu Purple Transmission Distance: 6
PLA Sunlu Meta White Transmission Distance: 8

Swap Instructions:
Start with Black
At layer #11 (0.67mm) swap to Purple
At layer #18 (0.95mm) swap to White for the rest.