This is the original magnetic clock, I was only going to post this on Etsy, until I found out someone here stole the design, so thought I'd post the original.

This is a wall hanging clock. Most clock mechanisms found on Amazon will work as long as you select the mechanism with the 6mm length thread.

You'll need to order Qty 8 of 6mm Diameter by 2mm thick magnets. (which actually measure 4.8mm diameter x 1.6mm thick)

Print the face of the clock face down to make the surface as smooth as possible (a smooth plate will also help)

Print all of the parts and assemble. It's really a simple build

* Install the 8 magnets, ensuring the polarity is correct

* Install the clock mechanism

* Assemble the clock mechanism hands to the correct pinions on the mechanism

* Assemble the back plate to the front plate by simply aligning the pins to the holes

* Place the magnetic front hands to the magnets on the inner hands, if you're close enough, they will find their way.

Intellectual Property Warning

[https://docs.google.com/document/d/1xvsnVsyrgOc4ePlwafu1LrdOusEiITvd_l6DpnUGvwY/edit?usp=sharing](https://docs.google.com/document/d/1xvsnVsyrgOc4ePlwafu1LrdOusEiITvd_l6DpnUGvwY/edit?usp=sharing)