Project: casper.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm

Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyTerra Muted Blue Transmission Distance: 0.3
PLA PolyTerra Arctic Teal Transmission Distance: 0.5
PLA Overture Matte White Transmission Distance: 3.7
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Muted Blue
At layer #16 (1.36mm) swap to Arctic Teal
At layer #19 (1.6mm) swap to White for the rest.