The AMS profile has dimensions of: 142.8 x 200 x 1.6 mm / 5.6 x 7.8 x .06 in

A HueForge can take a bit to slice, but all the settings in the slicer are ready for a 0.4 nozzle. Below are the filament swap instructions. Keep in mind that if you use a different brand than I did, the color of the print might vary. No supports needed.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Basic Black

PLA PolyLite Pro Orange

PLA BambuLab Basic Gold

PLA BambuLab Basic Jade White

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Orange

At layer #13 (1.12mm) swap to Gold

At layer #14 (1.2mm) swap to Orange

At layer #15 (1.28mm) swap to Jade White

At layer #19 (1.6mm) swap to Gold for the rest.