Experimenting with Color Match mode in Hueforge

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.7mm

Filaments Used:
PLA+ Numakers Pitch Black Transmission Distance: 0.8
PLA+ Numakers Dark Grey Transmission Distance: 4.8
PLA+ Numakers Nuclear Red Transmission Distance: 2.8
PLA+ Numakers Outrageous Orange Transmission Distance: 10
PLA+ Numakers Bahama Yellow Transmission Distance: 3.7
PLA+ Numakers Apricot Transmission Distance: 11
PLA+ Numakers Light Gray Transmission Distance: 3.2
PLA+ Numakers Pure White Transmission Distance: 4.8
This print uses 8 unique filaments

Swap Instructions:
Start with Pitch Black
At layer #9 (0.48mm) swap to Dark Grey
At layer #10 (0.52mm) swap to Nuclear Red
At layer #15 (0.72mm) swap to Outrageous Orange
At layer #16 (0.76mm) swap to Bahama Yellow
At layer #17 (0.8mm) swap to Apricot
At layer #19 (0.88mm) swap to Bahama Yellow
At layer #20 (0.92mm) swap to Dark Grey
At layer #21 (0.96mm) swap to Light Gray
At layer #22 (1mm) swap to Apricot
At layer #23 (1.04mm) swap to Bahama Yellow
At layer #24 (1.08mm) swap to Outrageous Orange
At layer #26 (1.16mm) swap to Bahama Yellow
At layer #28 (1.24mm) swap to Pure White for the rest.