士官长支架，可以用来支撑手柄、笔、手机之类的东西。

一开始是想尝试一体打印，这样结构强度高一些，并且支撑能力更好。但是尝试打印了很多次，手臂位置总是失败，可能是因为哑光材料，层间粘合力差，手臂的支撑树总是会断，打一次需要19个小时，耗费材料也很多，实在折腾不起。

后面直接放弃这种方式，对模型进行分件，这样支撑会少很多，而且打印效果看起来更棒些。比如手臂的下方就不再需要大量的悬垂支撑，头盔的帽檐也不再需要支撑，整体打印变得更容易，支撑也更好拆除。

测试模型之间的公差也浪费了不少材料，如果喜欢的话，还请助力一下。

Master Chief Stand, which can be used to support things like handles, pens, cell phones, etc.

At first, I wanted to try to print in one piece, so that the structure is stronger and the support capacity is better. But after trying to print many times, the arm position always fails, the arm support tree always breaks, it takes 19 hours to hit once, and it consumes a lot of materials, so I can't afford to toss.

Later,I abandon this method and divide the model into parts, so that there will be a lot less support, and the printing effect will look better. For example, there is no longer a need for a lot of draping support under the arm, and the brim of the helmet no longer needs to be supported, making it easier to print overall and the support to remove.

The tolerances between the test models also waste a lot of material, so please help if you like it.